Skip to content

Import SDK Specs from V12 to V14

Overview

This is a two stage process, designed to bulk import SWAGGER specs from V12 into v14 of the SDK.

Tip

It is possible to do this one at a time by first downloading the SWAGGER spec from V12 SDK to a local PC folder using the More>Download function in the generate tab in the V12 SDK instance.

Then import this downloaded spec using either New> Import Provider or Import Consumer from the specification list function in SDK V14.

Bulk Import Steps

SDK Users

For bulk imports via MDRCVT12, please ensure that users are already registered in the V14 SDK prior to importing.

Step 1 - Copy from v12 Folders

This MDRCVT12 command bulk copies V12 specs from the V12 SDK folders, into the V14 file MDRDOAPI. It is run from the MDRest4i V14 library

Step 2 - Convert to V14 SDK format

This is a bulk import function for all SWAGGER specs pre-copied in the SDK MDRDOPAI database file via the MDRCVT12 command

The list of copied v12 specs appears as below:

One, more or all specs can be selected for the import into v14 using the "Filter" section:

On selecting the specs, the "Import Selected Specs" button on the top right is enabled. Click the button and the specs will be imported!

On successful import, a popup comes up

The bulk import is completed and the specs allocated to the same users they were allocated to in the V12 SDK.